H8SSLASH2214 datasheet(81/936 Pages) RENESAS

81 / 936 page

Section 2 CPU

Rev.4.00 Sep. 18, 2008 Page 21 of 872

REJ09B0189-0400

All instructions and addressing modes can be used. Only the lower 16 bits of effective addresses

(EA) are valid.

(d) Exception Vector Table and Memory Indirect Branch Addresses

In normal mode the top area starting at H'0000 is allocated to the exception vector table. One

branch address is stored per 16 bits. The configuration of the exception vector table in normal

mode is shown in figure 2.2. For details of the exception vector table, see section 4, Exception

Handling.

H'0000

H'0001

H'0002

H'0003

H'0004

H'0005

H'0006

H'0007

H'0008

H'0009

H'000A

H'000B

Power-on reset exception vector

Manual reset exception vector

Exception vector 1

Exception vector 2

Exception

vector table

(Reserved for system use)

Figure 2.2 Exception Vector Table (Normal Mode)

The memory indirect addressing mode (@@aa:8) employed in the JMP and JSR instructions uses

an 8-bit absolute address included in the instruction code to specify a memory operand that

contains a branch address. In normal mode the operand is a 16-bit word operand, providing a 16-

bit branch address. Branch addresses can be stored in the top area from H'0000 to H'00FF. Note

that this area is also used for the exception vector table.

H8S/2214 Scheda tecnica(PDF) 81 Page - Renesas Technology Corp