H8SSLASH2224 datasheet(790/1071 Pages) RENESAS

790 / 1071 page

Section 17 A/D Converter

Rev. 5.00 Aug 08, 2006 page 704 of 982

REJ09B0054-0500

17.8

Usage Notes

17.8.1

Module Stop Mode Setting

Operation of the A/D converter can be disabled or enabled using the module stop control register.

The initial setting is for operation of the A/D converter to be halted. Register access is enabled by

clearing module stop mode. For details, refer to section 24, Power-Down Modes.

17.8.2

Permissible Signal Source Impedance

This LSI’s analog input is designed such that conversion accuracy is guaranteed for an input signal

for which the signal source impedance is 5 k

Ω or less. This specification is provided to enable the

A/D converter’s sample-and-hold circuit input capacitance to be charged within the sampling time;

if the sensor output impedance exceeds 5 k

Ω, charging may be insufficient and it may not be

possible to guarantee A/D conversion accuracy. However, for A/D conversion in single mode with

a large capacitance provided externally, the input load will essentially comprise only the internal

input resistance of 10 k

Ω, and the signal source impedance is ignored. However, as a low-pass

filter effect is obtained in this case, it may not be possible to follow an analog signal with a large

differential coefficient (e.g., 5 mV/

µs or greater) (see figure 17.9). When converting a high-speed

analog signal, a low-impedance buffer should be inserted.

17.8.3

Influences on Absolute Accuracy

Adding capacitance results in coupling with GND, and therefore noise in GND may adversely

affect absolute accuracy. Be sure to make the connection to an electrically stable GND such as

AVss.

Care is also required to insure that filter circuits do not communicate with digital signals on the

mounting board (i.e., acting as antennas).

A/D converter

equivalent circuit

This LSI

20 pF

Cin =

15 pF

10 k

Ω

Low-pass

filter C

to 0.1

µF

Sensor output

impedance

to 5 k

Ω

Sensor input

Figure 17.9 Example of Analog Input Circuit

H8S/2224 Scheda tecnica(PDF) 790 Page - Renesas Technology Corp

H8S/2224 Scheda tecnica(HTML) 790 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL