ATtiny261-ESSZ datasheet(127/227 Pages) ATMEL

Il numero della parte	ATtiny261-ESSZ

Spiegazioni elettronici	8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash

PDF	227 Pages

Scroll/Zoom	100%

Produttore elettronici	ATMEL [ATMEL Corporation]

Homepage	http://www.atmel.com

Logo

127 / 227 page

127

7753C–AVR–07/09

ATtiny261/ATtiny461/ATtiny861

16.11.14 DT1 – Timer/Counter1 Dead Time Value

The dead time value register is an 8-bit read/write register.

The dead time delay of all Timer/Counter1 channels are adjusted by the dead time value regis-

ter, DT1. The register consists of two fields, DT1H3..0 and DT1L3..0, one for each

complementary output. Therefore a different dead time delay can be adjusted for the rising edge

of OC1x and the rising edge of OC1x.

• Bits 7:4- DT1H3:DT1H0: Dead Time Value for OC1x Output

The dead time value for the OC1x output. The dead time delay is set as a number of the pres-

caled timer/counter clocks. The minimum dead time is zero and the maximum dead time is the

prescaled time/counter clock period multiplied by 15.

• Bits 3:0- DT1L3:DT1L0: Dead Time Value for

OC1x Output

The dead time value for the

OC1x output. The dead time delay is set as a number of the pres-

caled timer/counter clocks. The minimum dead time is zero and the maximum dead time is the

prescaled time/counter clock period multiplied by 15.

Bit

76543210

0x24 (0x44)

DT1H3

DT1H2

DT1H1

DT1H0

DT1L3

DT1L2

DT1L1

DT1L0

DT1

Read/Write

R/W

Initial value

00000000

ATtiny261-ESSZ Scheda tecnica(PDF) 127 Page - ATMEL Corporation