H8SSLASH2224 datasheet(653/1071 Pages) RENESAS

Il numero della parte	H8S/2224

Spiegazioni elettronici	16-Bit Single-Chip Microcomputer H8S Family/H8S/2200 Series

PDF	1071 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

653 / 1071 page

Section 15 Serial Communication Interface (SCI)

Rev. 5.00 Aug 08, 2006 page 567 of 982

REJ09B0054-0500

Bit

Bit Name

Initial

Value

R/W

Description

ORER

R/(W)*

Overrun Error

Indicates that an overrun error occurred during

reception, causing abnormal termination.

[Setting condition]

When the next serial reception is completed while

RDRF = 1

The receive data prior to the overrun error is

retained in RDR, and the data received

subsequently is lost. Also, subsequent serial

cannot be continued while the ORER flag is set to

1. In clocked synchronous mode, serial

transmission cannot be continued, either.

[Clearing condition]

When 0 is written to ORER after reading ORER =

The ORER flag is not affected and retains its

previous state when the RE bit in SCR is cleared to

4ERS

R/(W)*

Error Signal Status

Indicates that the status of an error signal returned

from the receiving end at reception

[Setting condition]

When the low level of the error signal is sampled

[Clearing condition]

When 0 is written to ERS after reading ERS = 1

The ERS flag is not affected and retains its

previous state when the TE bit in SCR is cleared to

H8S/2224 Scheda tecnica(PDF) 653 Page - Renesas Technology Corp