H8SSLASH2224 datasheet(316/1071 Pages) RENESAS

Il numero della parte	H8S/2224

Spiegazioni elettronici	16-Bit Single-Chip Microcomputer H8S Family/H8S/2200 Series

PDF	1071 Pages

Scroll/Zoom	100%

Produttore elettronici	RENESAS [Renesas Technology Corp]

Homepage	http://www.renesas.com

Logo

316 / 1071 page

Section 8 DMA Controller (DMAC)

Rev. 5.00 Aug 08, 2006 page 230 of 982

REJ09B0054-0500

chain transfer. When re-setting the control register area, perform masking by setting bits in

DMAWER to prevent modification of the contents of other channels.

DTC

IOAR_0A

ETCR_0A

IOAR_0B

ETCR_0B

IOAR_1A

ETCR_1A

IOAR_1B

ETCR_1B

DMATCR

DMACR_0B

DMACR_1B

DMAWER

DMACR_0A

DMACR_1A

DMABCR

Second transfer area

using chain transfer

First transfer area

MAR_0AH

MAR_0AL

MAR_0BH

MAR_0BL

MAR_1AH

MAR_1AL

MAR_1BH

MAR_1BL

Figure 8.2 Areas for Register Re-Setting by DTC (Channel 0A)

Writes by the DTC to bits 15 to 12 (FAE and SAE) in DMABCR are invalid regardless of the

DMAWER settings. These bits should be changed, if necessary, by CPU processing.

In writes by the DTC to bits 7 to 4 (DTE) in DMABCR, 1 can be written without first reading 0.

To reactivate a channel set to full address mode, write 1 to both Write Enable A and Write Enable

B for the channel to be reactivated.

MAR, IOAR, and ETCR can always be written to regardless of the DMAWER settings. When

modifying these registers, the channel to be modified should be halted.

H8S/2224 Scheda tecnica(PDF) 316 Page - Renesas Technology Corp