ADIN1300CCPZ-R7 datasheet(16/96 Pages) AD

16 / 96 page

Data Sheet

ADIN1300

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

analog.com

Rev. B | 16 of 96

Table 13. Pin Function Descriptions (Continued)

Pin No.

Mnemonic

Supply Domain Description

Power and Ground Pins

4, 28, 36

DVDD_0P9

0.9 V Digital Core Power Supply Input. Connect 0.1 μF and 0.01 μF capacitors to GND as close as

possible to these pins.

GND

This pin must be connected to GND on the board.

11, 20

AVDD_3P3

3.3 V Power Supply Input for the PHY Interface, Analog Circuitry, Crystal Oscillator, DLL,

RESET_N, CLK25_REF Generation, and LED Circuitry. Connect 0.1 μF and 0.01 μF capacitors to

GND as close as possible to these pins.

25, 31, 40

VDDIO

3.3 V/2.5 V/1.8 V MDIO and MAC Interface Power Supply Input. Connect 0.1 μF and 0.01 μF

capacitors to GND as close as possible to these pins. If using 3.3 V, to minimize power supplies,

VDDIO and AVDD_3P3 can be connected to the same supply.

Exposed Pad. The LFCSP package has an exposed pad that must be soldered to a metal plate on

the PCB for mechanical reasons and to GND. A 4 × 4 array of thermal vias beneath the exposed

GND pad is also required.

1 In cases where a pin is shared between a functional signal(s) and a hardware pin configuration signal(s), the hardware pin configuration signal(s) is the last name in the

mnenomic and the pin is referred to using the functional signal(s) name throughout the data sheet.

Table 14. Pin Function Descriptions for Each MAC Interface Option

Pin No.

Mnemonic1

MAC Interface Pin Function2

Internal

Pull-

Down3

RGMII

MII and EEE Advertisement Disabled4

MII and EEE Advertisement Enabled3, 5

RMII

TXD_1

Yes

TXD_1

TXD_2

Yes

TXD_2

TXD_3

Yes

TXD_3

XTAL_I/CLK_IN/REF_CLK

REF_CLK6

LED_07/COL/TX_ER

COL

TX_ER8

INT_N7/CRS

Yes

CRS

GP_CLK7/RX_ER

RX_ER

RXD_3

Yes

RXD_3

RXD_2

Yes

RXD_2

RXD_1

Yes

RXD_1

RXD_0

Yes

RXD_0

RXC/RX_CLK

Yes

RXC

RX_CLK

RX_CTL/RX_DV/CRS_DV

Yes

RX_CTL

RX_DV

CRS_DV

TX_CTL/TX_EN

Yes

TX_CTL

TX_EN

TXC/TX_CLK

Yes

TXC

TX_CLK

TXD_0

Yes

TXD_0

1 Hardware pin configuration signal(s) have been omitted for clarity.

2 Wherever the field is left blank, the pin function is the first function listed in the Mnemonic column.

3 Typical Value of 45 kΩ.

4 EEE advertisement enabled/disabled using the hardware pin configuration. See the Hardware Configuration Pins section.

5 EEE does not support half duplex. Therefore, no CRS pin or COL pin is required.

6 A 50 MHz reference clock must be supplied on the XTAL_I/CLK_IN/REF_CLK pin when using the RMII MAC interface option.

7 These pin functions can also be reconfigured via software.

8 Because TX_ER shares a pin with COL, this pin is grouped with the PHY output pins, even though TX_ER is actually a PHY input pin.

ADIN1300CCPZ-R7 Scheda tecnica(PDF) 16 Page - Analog Devices

ADIN1300CCPZ-R7 Scheda tecnica(HTML) 16 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96

Scheda tecnica Scarica

Link URL