| Motore di ricerca datesheet componenti elettronici |
|
WM8281ECS/R Scheda tecnica(PDF) 125 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
WM8281ECS/R Scheda tecnica(HTML) 125 Page - Cirrus Logic |
|
125 / 392 page ![]() WM8281 Rev 4.0 125 REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R4358 (1106h) DSP1 Status 3 3:1 DSP1_CLK_SEL _STS [2:0 000 DSP1 Clock Frequency (Read only, Only valid when the respective DSP Clock is enabled) 000 = 6.144MHz (5.6448MHz) 001 = 12.288MHz (11.2896MHz) 010 = 24.576MHz (22.5792MHz) 011 = 49.152MHz (45.1584MHz) 100 = 73.728MHz (67.7376MHz) 101 = 98.304MHz (90.3168MHz) 110 = 147.456MHz (135.4752MHz) 111 = Reserved The frequencies in brackets apply for 44.1kHz-related sample rates only (ie. SAMPLE_RATE_n = 01XXX). 0 DSP1_CLK_AVAI L 0 DSP1 Clock Availability (Read only) 0 = No Clock 1 = Clock Available Note – this bit exists for legacy software support only; it is not recommended for future designs, as the readback may be unreliable on the latest device architectures. R4608 (1200h) DSP2 Control 1 4 DSP2_MEM_EN A 1 DSP2 Memory Control 0 = DSP2 memory is cleared when DSP2_SYS_ENA=0, and during Hardware Reset or Software Reset. 1 = DSP2 memory is retained when DSP2_SYS_ENA=0. DSP2 memory is retained during Hardware Reset and Software Reset. 2 DSP2_SYS_ENA 0 DSP2 Clock Enable 0 = Disabled 1 = Enabled The DSP2 Clock must be enabled for DSP2 firmware register access, code execution, or DMA operation. The DSP2 Core must be reset (by writing DSP2_CORE_ENA=0) when disabling the DSP2 Clock. R4609 (1201h) DSP2 Clocking 1 2:0 DSP2_CLK_SEL [2:0] 000 DSP2 Clock Frequency Select 000 = 6.144MHz (5.6448MHz) 001 = 12.288MHz (11.2896MHz) 010 = 24.576MHz (22.5792MHz) 011 = 49.152MHz (45.1584MHz) 100 = 73.728MHz (67.7376MHz) 101 = 98.304MHz (90.3168MHz) 110 = 147.456MHz (135.4752MHz) 111 = Reserved The DSP2 Clock must be less than or equal to the SYSCLK frequency. The frequencies must also be integer-related (eg. divide by 1, 2, 3 etc.). The frequencies in brackets apply for 44.1kHz-related sample rates only (ie. SAMPLE_RATE_n = 01XXX). |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |