| Motore di ricerca datesheet componenti elettronici |
|
HC05V7GRS/D Scheda tecnica(PDF) 98 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
HC05V7GRS/D Scheda tecnica(HTML) 98 Page - NXP Semiconductors |
|
98 / 170 page ![]() SECTION 14: SERIAL PERIPHERAL INTERFACE Page 84 MC68HC05V7 Specification Rev. 1.0 The SPI forces the direction on some of the pin to output in order to function properly. Figure 14-1: Data Clock Timing Diagram 14.1.1 Master In Slave Out (MISO/PF3) The MISO line is configured as an input in a master device and as an output in a slave device. It is one of the two lines that transfer serial data in one direction, with the most significant bit sent first. The MISO line of a slave device is placed in the high-impedance state if the slave is not selected. 14.1.2 Master Out Slave In (MOSI/PF2) The MOSI line is configured as an output in a master device and as an input in a slave device. It is one of the two lines that transfer serial data in one direction with the most significant bit sent first. 14.1.3 Serial Clock (SCK/PF1) The master clock is used to synchronize data movement both in and out of the device through its MOSI and MISO lines. The master and slave devices are capable of exchanging a byte of information during a sequence of eight clock cycles. Since SCK is generated by the master device, this line becomes an input on a slave device. As shown in Figure 14-1, four possible timing relationships may be chosen by using control bits CPOL and CPHA in the serial peripheral control register (SPCR). Both master and slave devices must operate with the same timing. The master device always places data on the MOSI line a half-cycle before the clock edge (SCK), in order for the slave device to latch the data. Two bits (SPR0 and SPR1) in the SPCR of the master device select the clock rate. In a slave device, SPR0 and SPR1 have no effect on the operation of the SPI. INTERNAL STROBE FOR DATA CAPTURE (ALL MODES) MSB 6543210 SS SCK SCK SCK SCK MISO/MOSI (CPOL=0, CPHA=0) (CPOL=0, CPHA=1) (CPOL=1, CPHA=0) (CPOL=1, CPHA=1) Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |